Stuccopuro
The decorative concrete-look wall finish!
Stuccopuro is a mineral and plastic bonded inner plaster which gives a matt concrete look.
- Powdery concrete look effect
- Suitable as a decorative wall finish
- Ready-to-use product: ready quickly!
- Available in 60 natural shades
Ready-to-use product: you can start right away
Available in 60 soft shades
Suitable as a decorative wall finish
Easy to maintain
Prime the substrate with MCG primer. Do you have an absorbent substrate? Then dilute the primer 1:1 with water.
Apply the first layer of Stuccopuro as evenly as possible with a stainless steel spacking knife. Allow this layer to dry until "hand dry.
Also apply the second coat with the same spackling knife. Let it dry thoroughly. Optionally, for a lively effect, the second coat can be misted and plastered on.
Optionally, for a lively effect, the second layer can be misted with water after which you can plaster the surface again.
Optionally, finish the stucco coat with an SA Protect Mat to make the surface stain-resistant. Use a microfiber roller for this purpose.
- Powdery concrete look effect
- Suitable as a decorative wall finish
- Ready-to-use product: ready quickly!
- Available in 60 natural shades
Systeemopbouw
The powdery concrete look with a decorative finish. Can be applied in no time at all. In a few layers, you can give the wall in your home or office a different look. View the instructions for the correct method.
Hospitality and retail
Your business’ ambiance is key to your success
Living spaces
For walls, floors and home accessories in every interior style
Stuccopuro colors
Stuccopuro is ready to use and available in 60 beautiful powdery shades. Would you like a lot of colour or earthy shades? No problem! Do you find it difficult to choose a colour? Then request a sample!
Is Stuccupuro suitable for wet rooms, such as bathrooms?
No, Stuccopuro is a decorative interior plaster which is not suitable for wet rooms.
Can I use Stuccopuro as a floor finish?
No, Stuccopuro is not suitable for the floor. We have Basebeton for that!
Can I apply Stuccopuro over the current tiles?
Yes, and that saves you a lot of demolition work. The prerequisite is that the subsurface is flat and stable. First smooth out the subsurface and then apply the Stuccopuro. In this way you will have a tight concrete-look wall in no time.
Can I order Stuccopuro in any color?
We deliver Stuccopuro in 60 beautiful colours. Do you have doubts about the right colour? Then contact us for advice or order a sample.
How much Stuccopuro do I need?
The consumption of Stuccopuro is: 1st layer 200-300 gr/m2 and 2nd layer 100-200 gr/m2.
How can I best prepare the surface?
Make the surface smooth, clean and dust-free. It depends on the substrate whether and how you should level it and which pre-treatment is required. Consult our manual or ask us for advice.
Want to quickly create a decorative concrete look wall in your home? Then choose Stuccopuro!
Stuccopuro is ready to use, so you can process it quickly and easily.
Stuccopuro is a mineral and plastic bonded inner plaster which gives a matt concrete look.
The decorative concrete look wall finish is available in up to 60 warm shades. So there is always a color that fits into your interior. Whether you go for a soothing subtle shade or just want more color in your interior, anything is possible!
Stuccopuro is delivered ready to use color. That means an immediate start with a fast processing time! In other words, quickly change the look of your living room, bedroom or kitchen!
Are you a professional concrete look processor and would you like to get acquainted with Stuccopuro? Contact us for a training or make an appointment and discuss the possibilities for your project.